Description
Motorcycle Rear Wheel Mobile Paddock Stand
This is a rear wheel stand with a difference. Not-only is it very well made, but it comes with 3 wheels, so that once your motorcycle is installed, you simply use it to wheel it around your garage / workshop area. However, unlike other rear paddock stands, this one allows you to go in any direction, as the wheels are not fixed into position.
Its primary design is to allow you to easily move the rear end around while being secure.
Know this: Where this paddock stand is really clever is that it has an inner U-shaped arm that stays on the ground as you angle the outer arm (with its clamps) into position. This makes it a lot easier to hoist the bike onto the stand.
This stand is designed for anyone who needs to move the motorcycle in/out of tight spaces, or perhaps diagonally to allow access all round.
Specification:
- Very high quality
- Universal product
- Weight: 10.5kg
- Made from steel
- Comes with 3 wheels in total for extra rolling stability - all multi-directional
- Easily allows you to manoeuvre your motorbike
Comes with:
- Paddock stand
- all necessary nuts and bolts
- 3 x wheels, 2 of which are on separate steel brackets
How to operate:
- For this paddock stand to work, you'll need swingarm bobbins fitted
- Ensure that the motorcycle is on a flat surface
- Align our stand to the rear wheel as accurately as possible
- Have someone hold the motorcycle upright and in neutral, applying the front brake
- While holding the stand in place, adjust the arms so that they sit directly in the groove of your swingarm bobbins, then press firmly on the stand's hoop and it will easily roll under and around the bottom of the rear wheel
- When in position, press down on the front wheel's brake
- To remove the stand, reverse the above procedure
N.B. If you've already fitted a front paddock stand, you won't need help to fit our rear stand. In fairness, you can even fit it without help, as long as you have a steady hand.