Motorcycle Rear Wheel Mobile Swingarm Paddock Stand
This is a rear wheel stand with a difference. Not-only is it very well made, but it comes with 5 wheels, so that once your motorcycle is installed, you simply use it to wheel it around your garage / workshop area. However, unlike other rear paddock stands, this one allows you to go in any direction, as the wheels are not fixed into position.
Its primary design is to allow you to easily move the rear end around while being secure.
This stand is designed for anyone who needs to move the motorcycle in/out of tight spaces, or perhaps diagonally to allow access all round.
***You MUST measure hole diameter before buying this item***
Specification:
- Very high quality
- Universal product that elevates any motorcycles' rear spindle (dependent on the pin size required)
- Weight: 10kg
- Made from steel
- Comes with 5 wheels in total for extra rolling stability
- Easily allows you to manoeuvre your motorbike
Comes with:
- Paddock stand
- all necessary nuts and bolts
- 2 x sets of x2 wheels on a steel bracket
- 2 pins. 1 has a diameter of both 25mm, sleeving down to 21mm, the other is 42.5mm
How to operate:
- Ensure that the motorcycle is on a flat surface
- Align our stand to the rear wheel as accurately as possible
- Have someone hold the motorcycle upright and in neutral, applying the front brake
- While holding the stand in place, press firmly on the stand's hoop and it will easily roll under and around the bottom of the rear wheel
- When in position, press down on the front wheel's brake
- To remove the wheel, reverse the above procedure
N.B. If you've already fitted a front paddock stand, you won't need help to fit our front stand. In fairness, you can even fit it without help, as long as you have a steady hand.
